Design Buy Build Issue 20 2016 | Page 11

® www.Lindapter.com Faster Steel Connections For over 80 years Lindapter has pioneered the design and manufacture of steel connections by providing a faster alternative to drilling or welding, saving contractors’ time and money. Hollo-Bolt ® HIGH SLIP RESISTANCE Type AAF Girder Clamp Hollo-Bolt A High Slip Resistance (HSR) steel clamping system for frictional applications and high tensile loading. Like most Lindapter products, it does not require drilling or welding, resulting in a faster installation and lower labour costs. The original expansion bolt for steelwork is a fast, cost-effective connection for Structural Hollow Section (SHS) that is quickly installed by inserting the Hollo-Bolt into a pre-drilled hole and tightening with a torque wrench. Rail Fixings Lifting Points Floor Fixings ® Support Fixings Decking Fixings 4 | Girder Clamps by Lindapter ® Type CF Lindapter products provide a faster, cost-effective alternative to on-site drilling or welding and are designed to reduce installation time and labour costs. A high strength, permanent (or temporary) connection is quickly achieved by clamping two steel sections together. Hooks over the flanges of beams, angles and channels to connect steel sections that do not face, such as connecting horizontal beams with vertical columns. Nose Anti-rotation marks HIGH SLIP RESISTANCE Step 1 Step 2 Step 3 Bring the location plate and the lower beam into position below the upper beam. Fit the bolts with two Lindapter clamps, any packings required, a nut and a washer. Using a torque wrench, simply tighten each bolt to the recommended torque. Legs Y RAIL FIXINGS RAIL FIXINGS GIRDER CLAMPS Quick and easy to install GIRDER CLAMPS X T LIFTING POINTS LIFTING POINTS NEW CATALOGUE Girder Clamps by Lindapter ® | 15 Girder Clamp - The Connection Concept Z HOLLO-BOLT • Can be combined with any Lindapter HSR clamps when used with property class 8.8 bolts; see table below for safe working loads. Save time and money £ • Suitable for parallel and tapered flanges up to 8o. Safer connections x On-site drilling and welding is avoided, removing the need for hot work permits and encouraging safer site conditions. High strength Industry leading approvals Lindapter clamps are manufactured from high strength materials to resist high load requirements and harsh environments. Lindapter has earned a reputation synonymous with safety and reliability, gaining multiple independent approvals. Further details can be found on page 74. Location plate / end plate details can be found on page 17. Adjustable Free connection design Quickly align steel sections by sliding the section into the correct position before tightening the Girder Clamp to complete the installation. Lindapter’s experienced Engineers can design a bespoke connection based on your specific requirements free of charge. See page 75 for more details. ® www.Lindapter.com © Lindapter International 2016 © Dimensions Slip Resistance1) / 2 Bolts (FOS 2:1) T Width mm mm 3.4 3.9 90 6 - 13 32 14 21 - 29 46 16.0 8.0 10.0 240 8 - 16 44 18 25 - 33 56 26.3 13.0 16.0 470 10 - 19 53 22 30 - 41 65 Z Tensile Resistance / 1 Bolt (FOS 5:1) kN Watch installation videos of Girder Clamps and many more products at www.Lindapter.com [phone] Safe Working Loads M16 M20 CF / A3) M12 M12 8.5 5.8 Painted Steelwork2) kN 0.7 Galv. Steelwork kN 0.7 Tightening Torque Nm 69 CF / A3) M16 7.3 1.7 147 CF / A3) M20 14.7 3.0 3.0 285 CF / AF M12 8.5 3.4 3.9 90 1.5 CF / AF M16 16.0 8.0 10.0 240 CF / AF M20 26.3 13.0 16.0 470 Lindapter International 2016 www.Lindapter.com Clamping Range V Y X mm mm mm 1) Slip Resistance figures are based on Type CF and Location Plates in hot dip galvanised finish calculated against slip (movement exceeding 0.1mm). 2) Shot blast and painted steelwork. 3) Also applies to Type B (page 9), Type LR (page 18), Type D2 (page 19) and Type BR (page 31). [phone] DECKING FIXINGS Turn to page 6 to see the components of a Girder Clamp in more detail. ® Bolt 8.8 ® CF16 CF20 Product Code CF12 Established 1934 CF combinations with other Lindapter clamps FLOOR FIXINGS Clamping two steel sections together avoids time-consuming welding or conventional drilling and bolting. Material: SG iron to EN 1563, hot dip galvanised to EN ISO 1461. kN SUPPORT FIXINGS SUPPORT FIXINGS £ £ FLOOR FIXINGS REASONS TO USE... £ DECKING FIXINGS HOLLO-BOLT More product information can be found in the new Lindapter catalogue, out now! Visit www.Lindapter.com for your copy. V ® Technical Innovation in Steelwork Connections Lindapter International Brackenbeck Rd, Bradford BD7 2NF | T: [phone] | [email protected] | www.Lindapter.com