DC Gearbox WeedRoller Owner's/Part Manual | Page 22
5
Section
TROUBLESHOOTING
5.1 TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
REMEDY
A. No electrical current.
A. Check all connections.
B. 8 amp breaker kicked out.
B. Check for obstructions or electrical problems, reset breaker.
C. Smart switch bad
D. Smart switch shutdown
WeedRoller will not run.
E. Electric motor problems.
F.
Power supply failure.
C. Check connections, check switch arm
adjustment. Replace switch.
D. Disconnect power from controller, allow
to reset.
E. Check connections, check wiring, repair
or replace electric motor.
F.
A. Drive coupler problems.
Repair or replace.
A. Check all drive coupler connections and
components, repair or replace.
B. Obstruction stopping roller moveB. Clear all obstructions from lake bed area.
ment.
C. Weeds wrapped around rollers.
C. Clear weeds from roller.
D. Electric motor not working.
D. Repair or replace.
E. Rollers stuck in mud, muck, silt.
E. Free stuck rollers.
F.
Rollers will not turn.
F.
Gearbox failure.
A. Reversing switch not working.
B. Drive coupler problems
Replace gearbox.
A. Check all connections, repair and replace switch.
B. Check connections and components.
Repair if needed.
Rollers will not switch
directions.
A. Spring switch arm stops set wrong.
A. Adjust reed arms.
B. Drive head at wrong mounting angle. B. Change drive head angle.
Rollers running at wrong
arc.
16
C. Drive head contacts tube weldment C. Change drive head angle.
before desired roller arc is completed.
WeedRoller Owner's/Parts Manual
51285 R121411