DC Gearbox WeedRoller Owner's/Part Manual | Page 11
ASSEMBLY & MOUNTING
2.3 ATTACH DOCK MOUNT BRACKETS
1. Position the bottom bracket as low as possible on
your dock post. In typical installations, one bracket will
be above water and one bracket will be underwater. If
one bracket is underwater, use the adjustment knob
on the top bracket only.
SQUARE DOCK POST
ADJUSTMENT
KNOB
NOTE
Position the dock mount brackets at least 18" apart
(vertically) to give a stable and secure mount for the
drive head For increased stability, place the brackets
even farther apart.
2. Attach a dock mount bracket to the dock post with
either a V-bolt or U-bolt. Use U-bolts when mounting
straight off a square dock post. Use V-bolts for docks
with round posts or to achieve a 45 degree mount angle
off a square post. Secure the bolt with 3/8" washers
and nuts (see the following examples).
DOCK MOUNTING BRACKETS
(SPACE AT LEAST 18" APART)
U-BOLTS (FOR
SQUARE DOCK
POSTS)
BOTTOM
BRACKET
3. Position the remaining bracket at least 18" above the
bottom bracket, insert the V- or U-bolt, and secure with
3/8" washers and nuts. Torque hardware to 30 ft-lbs.
Figure 3: Square Dock Mount Brackets
SQUARE DOCK POST
(BRACKET AT 45°)
ROUND DOCK POST
ADJUSTMENT
KNOB
ADJUSTMENT
KNOB
DOCK MOUNTING BRACKETS
(SPACE AT LEAST 18" APART)
DOCK MOUNTING BRACKETS
(SPACE AT LEAST 18" APART)
V-BOLTS (FOR
ROTATED SQUARE
DOCK POSTS)
V-BOLTS (FOR
ROUND DOCK
POSTS)
BOTTOM
BRACKET
BOTTOM
BRACKET
Figure 2: Square Dock Mount Brackets (rotated 45 deg.)
Figure 4: Round Dock Mount Brackets
51285 R121411
WeedRoller Owner's/Parts Manual
5