Collins Catalog March 2024 | Page 39

OTA ANTENNAS Televes Accessories

Avant X OTA Processor “ F ” Domestic Amplifier ( UL certified ) # TEV532180 - $ 399.00
Multi-input multiband amplifier , perfect for terrestrial individual or MDU ( Multi Dwelling Unit ) installations , that allows programming up to 32 digital filters on 4 LowVHF + HighVHF + UHF inputs ( DTT ).
The multiband amplifier is equipped with 6 inputs : __ FM , 4 x LowVHF / HighVHF / UHF , & CATV __ and can achieve
programmable amplification and balancing of the different RF inputs .
5 outputs ( 4 + TV ): VHF / UHF # TEV552380 - $ 35.00
Domestic amplifier with 5 outputs ( 4 + TV ) to extend the terrestrial television domestic network . The TV output provides a lower gain for direct connection to the television set ( no outlet installation . The amplifier is UL certified ( US plug ).
Thanks to ASuite , the multiband amplifier programming is very easy and intuitive using an Android or Windows / Mac application .
The multiband amplifier is able to detect LTE signals and automatically set the filter to channel 36 ( for LTE600 ) or 51 ( for LTE700 ), thanks to the automatic LTE filtering .
“ F ” Power Supply Unit ( UL certified ) # TEV550104 - $ 29.00
Domestic 12 V-power supply ( 220 mA ) that powers equipment through the input coaxial cable while allowing the transmission of the TV signal . Included in the installation to power either mast amplifiers or a BOSS system . Furthermore , it is equipped with two outputs . The power supply is UL certified ( US plug ).
TForce Mast Amplifier w / BOSS Tech and “ F ” Power Supply Unit
Active device that filters and amplifies terrestrial television signals coming from a single antenna , optimizing LTE band rejection up to channel 36 ( Repack Ready ). Equipped with either a single input or two inputs for amplification on LowVHF , HighVHF and UHF bands . The amplifier is powered through the output coax .
The kit is complemented with a domestic 12 V-power supply unit ( 220mA ), which is included in the installation kit to provide the amplifier with the necessary power . The PSU powers equipment through the input coaxial cable while allowing the transmission of the TV signal . Furthermore , it is equipped with two outputs . This power supply is UL certified ( US plug ).
These devices allow the installer to adapt the output level according to the necessary characteristics of the distribution network .
1 input , 608 MHz # TEV560383 - $ 69.00
2 input , 608 MHz # TEV560483 - $ 79.00
SmartKom 3 Antenna Amplifier
# TEV531981 - $ 199.00
SmartKom is a professional OTA television signal processing solution designed for simple and easy installation . Users will easily be able to filter , balance , mix and amplify television signals received from up to a maximum of 3 antennas thus , increasing the number of channels received in a given location while avoiding the use of mechanical solutions such as rotors . This allows for the distribution of television programs received from the antennas over a single Coax Cable routed to the home . SmartKom is compatible with ATSC 1.0 and ATSC 3.0 ( The new Broadcast TV Standard ) including High Definition and Ultra High Definition programs . SmartKom can be installed indoors or outdoors , within the provided weatherproof enclosure .
Terrestrial Signal Combiner
3 inputs : LoVHF / FM-HiVHF / DAB-UHF # TEV404010 - $ 27.00
3-input combiner for several terrestrial bands . Includes mast-mount case for outdoor installation . Allows current pass from output to UHF input to power a mast amplifier or a BOSS system .
EasyF connection system : simplicity and savings EasyF is an innovative connection concept where the inner conductor of the coaxial cable is directly inserted in the device , thus improving connection reliability . Thanks to the absence of F connectors , the chassis can be reduced and the connection of two cables secured with a a single screw .
• Real time savings : speeding the installation is possible without the need for coaxial cable termination . Furthermore , there is no need for screwing the connectors on the device , which is sometimes difficult when there is little room
• Connection reliability : the clamp holding the cables prevents the coaxial cable to come off
• Cost savings : no additional connectors are required ( neither F nor IEC )
• Space optimization : inputs and outputs are always on the same side of the device to prevent coaxial cables from bending , and to make working inside cabinets and register boxes easier
• Very easy three-step mounting : only screwing and unscrewing the covers is required to connect both cables :
1 . Unscrew the device ’ s cover to access the connection 2 . Insert the previously stripped coaxial cables 3 . Close the cover and screw to ensure connection
GUARANTEED SAME-DAY SHIPPING on orders placed by 3pm ET
39