Duramax ® Hyamp ™ 85° hand torch parts
For use with the Powermax125 ®
Duramax Hyamp 85° hand torch parts
The entire hand torch and lead assembly can be replaced, or individual component parts can be replaced. Use the following part numbers to replace the entire Duramax Hyamp 85° hand
torch assembly. Part numbers starting with 059 indicate complete torch and lead assemblies. Please note Duramax Hyamp torches and consumables are also compatible for use with
Powermax45 XP/65/85/105 systems.
Item Kit/Part number
059492 1
059493 1
059494 1
059665 2
1 228719
2 075696
3 428158
4 428253
5 428156
6 428162
7 428148
8 428159
8 428160
8 428161
8 428762
9 428155
428260
Description
Duramax Hyamp 85° hand torch assembly with 7.6 m (25') lead
Duramax Hyamp 85° hand torch assembly with 15 m (50') lead
Duramax Hyamp 85° hand torch assembly with 23 m (75') lead
Duramax Hyamp 85° hand torch assembly with 45.7 m (150') lead
Kit: Duramax and Duramax Hyamp hand torch cap-sensor switch
Pilot terminal screw
Kit: Duramax Hyamp 85° hand torch main body
Kit: Duramax Hyamp O-ring (5)
Kit: Duramax Hyamp hand torch trigger with spring
Kit: Duramax Hyamp start switch
Kit: Duramax Hyamp hand torch handle screws
Kit: Duramax Hyamp hand torch lead, 7.6 m (25')
Kit: Duramax Hyamp hand torch lead, 15 m (50')
Kit: Duramax Hyamp hand torch lead, 23 m (75')
Kit: Duramax Hyamp hand torch lead, 45.7 m (150')
Kit: Duramax Hyamp 85° torch handle
Kit: Duramax and Duramax Hyamp torch quick disconnect repair (lead side)
The torch assembly does not include consumables.
This torch is only compatible with Powermax125s built after November 14, 2017 (serial number 125-007944 or higher) or that have had the DSP board replaced with a board built after this date.
1
2
9
6
8
1
2
5
3
4
7
See pages 64–65 for current system part number information.
52 www.hypertherm.com