catalog_lr.pdf (Oct. 2014) - Page 11

TYPE OF TOOL BLACKSMITH’S SLEDGE or ENGINEER’S HAMMERS Double Face, Straight or Cross Pein. WEIGHT OF HAMMER HEAD 2 - 2 1⁄2 lb. RECOMMENDED HANDLE No. 7416-0-wt. 16” Hand Hammer Handle (Eye 7⁄8” x 5⁄8”) No. 7216 16” Machinist’s Hammer Handle - for No. 3 Eye (Eye 7⁄8” x 5⁄8”) 3 - 4 lb. No. 7416 16” Hand Hammer handle (Eye 1” x 3⁄4”) Nos. 7220 to 7224 20” to 24” Machinist’s Hammer Handle available (Eye 1” x 3⁄4”) No. 7218 18” Machinist’s Hammer Handle - for No. 3 Eye (Eye 1” x 3⁄4”) 6 - 8 lb. Nos. 2126-0-wt. to 2136-0-wt. 26” to 36” Sledge Hammer Handle (Eye 1 1⁄4” x 1”) No. 7318 18” Blacksmith’s Hammer Handle (Eye 1 1⁄4” x 1”) Nos. 7314 and 7316 14” and 16” Handles available (Eye 1 1⁄4” x 1”) SLEDGE HAMMERS Stoneworker’s spalling - Single or Double Face. Stone Sledge, oval face. (Specify weight as required) STRIKING HAMMERS Stoneworker’s Long & Short patterns. Nevada Drill, long pattern. Oregon Drill, short pattern. 10 - 16 lb. Nos. 2126 to 2136 26” to 36” Sledge Hammer Handle (Eye 1 3⁄8” x 1”) 18 - 24 lb. (Specify weight as required) No. 2636 36” Extra Heavy Sledge Hammer Handle (Eye 1 1⁄2” x 1 1⁄4”) 3 - 4 lb. No. 7416 16” Hand Hammer Handle (Eye 1” x 3⁄4”) 6 - 8 lb. Nos. 2130-0-wt to 2136-0-wt. 30” to 36” Sledge Hammer Handle (Eye 1 1⁄4” x 15⁄16”) 8 - 16 lb. Nos. 2130 to 2136 30” to 36” Sledge Hammer Handle (Eye 1 3⁄8” x 1”) 3 - 4 lb. No. 7416 16” Hand Hammer Handle (Eye 1” x 3⁄4”) Nos. 7220 to 7224 20” to 24” Machinist’s Hammer Handle (Eye 1” x 3⁄4”) 6 - 8 lb. Nos. 2230-0-wt. to 2236-0-wt. 30” to 36” Striking Hammer Handle (Eye 1 1⁄4” x 1”) No. 7318 18” Blacksmith’s Hammer Handle (Eye 1 1⁄4” x 1”) (Specify weight as required) 10 - 16 lb. NAPPING HAMMERS 3 - 4 lb. (Specify weight as required) SPIKE MAUL 6 lb. 8 - 10 lb. Nos. 2230 to 2236 30” to 36” Striking Hammer Handle (Eye 1 3⁄8” x 1”) Nos. 2330-0-wt. to 2336-0-wt. 30” to 36” Napping Hammer Handle (Eye 1” x 3⁄4”) Nos. 7220 to 7224 20” to 24” Machinist’s Hammer Handle (Eye 1” x 3⁄4”) Nos. 2330 to 2336 30” to 36” Napping Hammer Handle (Eye 1 1⁄4” x 1”) Nos. 2434 and 2436 34” and 36” Spike Maul Handle (Eye 1 3⁄8” x 1”) Packing & labeling: REGULAR PACKAGES - All handles 20" to 42" long are regularly packed in strong corrugated board cartons containing one dozen each as requested. Handles 10" to 18" are packed in cartons containing one dozen each. LABELING - Our own labels or brands are regularly applied to all handles. SPECIAL BRANDS - Your own labels will applied if furnished with order. We can, on request, stamp each handle with your firm name on any brand selected. There is a $30.00 charge for this service when orders call for ten dozen or more. Only one line of type can be used and length is limited to a maximum of 25 symbols and/or spaces. If handles are wanted without label or stamp of any kind, be sure to specify on order. Important Note: Hammer heads produced by different tool manufacturers may vary slightly in the size and shape of the eye. The Tennessee Hickory handles recommended above are designed for use with the majority of tools, without excessive fitting by the user. On request from quantity users, handles can be supplied sized especially for any particular make of hammer specified. Payment Terms: Our terms are 1% - 10 days - net 30. A service charge will be billed on overdue accounts at the rate of 1% per month. PayPal, checks accepted. Freight Allowances: All prices are F.O.B. factory with full freight allowed on shipments of 750 lbs. or $1,000.00 or more. Less than 750 lbs. or $1,000.00 no allowance - freight will be shipped collect. U.P.S. charges will be shown on invoice. West of Rockies/New England 1,000 lbs. or $1,250.00. Returns: Merchandise may not be returned without our authorization. If authorized, returns will be subject to incoming and outgoing freight charges, a 20% restocking charge, and any charges necessary to return the item to saleable condition. MINIMUM ORDER: $100.00 w w w.t e n nesseehicko r ypr oducts.com 11