Flow Control
20-290
20-005
WATER LEVEL CONTROLS
SURGE CHAMBER FLOAT CONTROL —
Float actuated multiport pilot control which
provides hydraulic on/off operation. Designed
for use in open surge tanks. Control operates
on minimum level change of 1" and maximum
level change of 19". Includes: float control
with 2' PVC rod, and wall mounting bracket.
Additional 1' PVC rod extensions and brass
connectors ordered separately. PVC rod
length is 5' maximum unless counter weight
is changed. Optional stainless steel float rods
and epoxy coated surfaces available. Use
with water make up valve, ordered separately.
20-005 Surge chamber float control
20-006 1' rod extension, PVC
20-007 Brass float rod connector
20-001 Repl. surge chamber float only, s.s.
LEVOLOR ELECTRONIC WATER LEVEL
CONTROLLER — Patented water level control
system electronically maintains water level in
pools, spas, and fountains. Easy to install on
new or existing facilities. Easy-to-read LED
display installed in weatherproof enclosure.
Remote sensor mounts in stand pipe or static
pipe. Includes: level controller (110V), sensor,
remote sensor housing, and 1" so lenoid valve
(24V). Note: Sensor cable must not be spliced.
Maximum pressure 125 PSI. Custom length
cables available for additional charge.
20-290 Controller with 50 ft. sensor cable
20-300 Controller with 100 ft. sensor cable
20-310 Controller with 200 ft. sensor cable
20-065
FLOAT VALVES
LINCOLN VERTICAL FLOAT VALVES —
Polypropylene body and disc with dual 8"
diameter adjustable plastic floats on stainless
steel vertical float rods. For horizontal pipe
installation. 80% shut off.
20-050 3"
20-065 8"
20-055 4"
20-070 10"
20-060 6"
20-075 12"
20-132 Replacement float only
20-096
20-030
20-010
WATER MAKE-UP VALVES — Hydraulically
operated, globe pattern diaphragm valve with
threaded connections. For use with surge
chamber float control. Ordered separately.
20-010 1"
20-025 21⁄2"
20-030 3"
20-015 11⁄2"
20-020 2"
20-045.B
20-045.A
20-045.C
WARRICK WATER LEVEL CONTROLLER —
Electric control monitors fluid levels and
activates water solenoid, when required.
Components include: differential level relay
mounted in NEMA 4 enclosure, flanged 3
probe holder, and 316 stainless steel probes,
3 required. Components ordered separately to
make complete system. Specify probe lengths
required. 120 volt solenoid ordered separately.
20-045.A Control w/NEMA 4 enclosure
20-045.B Flanged 3 probe fitting
20-045.C Stainless probes, per ft.
44
WATER SOLENOID VALVES —
For use with
water level controls to actuate water makeup
supply. 24 volt or 120 volt styles.
Size
3/4"
1"
11/2"
2"
24 Volt
20- 040
20-041
20-042
20-043
120 Volt
20-046
20-047
20-048
20-049
MERMADE LEVEL
CONTROL VALVES —
For water level control
in open top vacuum DE
filters and surge tanks
located below water level.
Water activated by water
pressure from circulation
pump. Powerful spring
actuator closes butterfly
valve, with positive shut
off, due to loss of flow
20-175
or power failure. Cast iron
body, with nylon coated aluminum bronze disc,
and EPDM seat. Pilot valve assembly ordered
separately and includes: 1⁄2" in-line strainer, 1⁄2"
needle valve, and 0-60 psi pressure gauge.
Minimum 20 psi air or water pressure required.
20-170 4"
20-185 10"
20-175 6"
20-190 12"
20-180 8"
20-195 Brass Pilot Valve Assembly
LINCOLN MODULATING FLOAT VALVES —
Polypropylene body and disc with dual or
single 8" diameter adjustable plastic floats
on stainless steel float rod. For vertical or
horizontal pipe installation. 80% shut off.
Size
3"
4"
6"
8"
10"
12"
20-132
Single Arm
Dual Arm
20-080
20-081
20-085
20-086
20-090
20-091
20-095
20-096
20-100
20-101
20-105
20-106
Replacement float only
YMCA STYLE FLOAT VALVES — Modulating
float valve for use in surge tanks and open
top Vacuum D.E. filters. YMCA style encases
float valve in PVC pipe, with angled diversion
plumbing and flanged connection. Float arm,
shaft, and disc are stainless steel, with black
plastic float ball.
20-320 4"
20-335 10"
20-325 6"
20-340 12"
20-330 8"
www.lincolnaquatics.com