Carbon Dioxide Systems
9-045
9-085
9-120
CARBON DIOXIDE DETECTOR
ANALOX CARBON DIOXIDE DETECTOR —
Monitors storage room for excess carbon
dioxide levels. Audible warning alarm and
light flashes on both remote indicator unit
placed outside of room and main sensor
unit mounted inside storage room. Range:
0.1- 5%. 110/240 VAC or 24 VDC.
9-120
CARBON DIOXIDE SYSTEMS
TEK™ CARBON DIOXIDE SYSTEMS — CO2
is used to lower the pH in swimming pools. CO2
forms Carbonic Acid to help lower pH levels.
CO2 generates a natural bicarbonate buffer
that makes the water more stable and prevents
the pH from dropping below 6.8. With Total
Alkalinity at the proper levels, pH changes are
very slow, and the pH is easier to maintain.
Safe! Eliminates the use of Muriatic Acid.
TEK™ AUTOMATIC SWITCHOVER SYSTEM
Includes: wall mounted, automatic switchover
regulator with pressure gauges, cylinder hoses,
20' CO2 tubing, and fittings. Pools without
automatic chemistry control, require purchase
of: TEK™ CO2 feed unit and CO2 diffuser with
check valve, plus any additional CO2 tubing
required, for each pool to be fed. Pools with
automatic chemistry control, require purchase
of: TEK™ CO2 solenoid valve or TEK™ CO2
feed unit with solenoid valve, and CO2 diffuser
with check valve, plus any additional CO2 tubing
required, for each pool to be fed. CO2 in-line
heaters (120v) can be added to each cylinder
being fed to reduce regulator freeze-up. Specify
pool size(s) when ordering.
9-045 CO2 system - Auto switchover
TEK™ SINGLE TANK SYSTEM — Includes:
single tank regulator with pressure gauge,
CO2 feed unit with flow meter, CO2 diffuser
with check valve, 20' CO2 tubing, and fittings.
Pools with automatic chemistry control require
purchase of TEK™ CO2 solenoid unit, plus any
additional CO2 tubing required.
9-040 CO2 system - Single tank
9-040
TOLL FREE (800) 223-5450
TEK™ CARBON DIOXIDE ACCESSORIES
9-050 CO2 solenoid valve, 120 volt, 1⁄4"
9-055 CO2 remote flow meter
9-060 CO2 diffuser with check valve
9-061 CO2 diffuser muffler
9-065 CO2 tubing, per ft.
9-070 CO2 teflon washers
9-075 CO2 in-line heater
9-076 CO2 stainless flex line, 24"
9-085
TEK™ CARBON DIOXIDE FEED UNITS —
Convenient, wall mounted, Carbon Dioxide
Feed Units used with single tank or automat ic
switchover regulators ordered separately.
NEMA 4 fiberglass enclosure houses CO 2
solenoid valve only, CO2 feed unit only, or
CO2 feed unit with solenoid valve. Order CO2
diffuser with check valve for each pool to be
fed, separately. 120 volt.
9-079 CO2 Solenoid Unit
9-080 CO2 Feed Unit
9-085 CO2 Feed Unit with Solenoid
TEK™ CARBON
DIOXIDE FEED SYSTEM
System includes fiberglass NEMA 4 enclosure
with CO 2 flow meter,
CO 2 solenoid valve, 3/ 4
HP booster pump, and
venturi. Available with
cast iron or stainless steel
booster pump, mounted
on fiberglass base. Must
be used with automatic
chemical controller. Use
one feed system for
each pool. CO2 regulator
(for each pool) ordered
separately. 120 volt.
9-115 CO2 Feed System - cast iron pump
9-116 CO2 Feed System - stainless pump
9-102
9-107
BULK STORAGE TANKS
CARBON DIOXIDE BULK STORAGE TANKS
Replaces need to store high pressure CO2
cylinders. Use of a bulk CO2 tank will do the job
of eight or more CO2 cylinders and will require
less floor space. Bulk tanks are permanently
installed and do not require your employees to
do cylinder changes or to move high pressure
cylinders. Exterior fill box allows bulk tank to be
filled conveniently. Double wall stainless steel
vessels with stable 6" welded uni-body legs.
Patented Sure-Fill system enables tank filling
with no manual venting. Available in 2 sizes:
450 lbs. (20" dia.) and 750 lbs. (26" dia.) Bulk
storage tanks include: tank with legs, external
tank epoxy coating, easy-to-read gauges for
CO2 contents and tank pressure, external
remote fill box, and connecting fill/vent hoses.
Item
Description
9-102 Carbo-Mizer 450
9-107 Carbo-Max 750
Liquid Maximum
Storage Continuous
Capacity Feed Rate
(lbs.)
(lbs./Hr.)
453
771
5.5
15
19