Swimming Pool Coatings
69-025
69-005
68-065
NELSONITE POOL COATINGS
NELSONITE SPEEDCOTE 2000 — Waterbased, single-component paint for conditions
that dictate "fast-in, fast-out" application. For
concrete or plaster finishes. Cures in two days.
Coverage: 300 sq. ft. per gallon. Colors: white,
bahama blue, lake blue, or black.
68-060 1 gallon
NELSONITE POOLPOXY II — High gloss,
2-part epoxy for concrete, plaster, fiberglass,
and aluminum pools. 3-6 day cure time.
Coverage: 275 sq. ft. per gallon. Colors: white,
bahama blue, lake blue, or black.
68-065 1 gallon kit
68-070 1 gallon - Poolpoxy Primer
NELSONITE POOLPOXY HI-BILD — 2-part,
high solids epoxy, that can be applied in a
single coat to a thickness of 10-12 mils. For
concrete, plaster, fiberglass, and previously
painted epoxy coated surfaces. To coat over
chlorinated rubber coating you must first prime
with Hi-Bild Primer. Color: off-white. Coverage:
150 sq. ft. gallon. Hi-Bild colors: white, bahama
blue, lake blue, or vanishing edge gray.
68-090 Hi-Bild, 1 gallon kit
68-095 Hi-Bild Primer, 1 gallon kit
NELSONITE SOLVENT — For use with
CR Pool Paint, Poolpoxy II and Poolpoxy
Primer. Solvent 175 is special VOC Compliant
formulation for use in California.
68-080 Solvent 150, 1 gallon
68-081 Solvent 175, 1 gallon
NELSONITE PREP A CLEANER — Liquid
additive used to clean surfaces prior to
painting. Prep A contains no phosphates, is
biodegradable, and reduces muriatic acid
fumes. For use on concrete, plaster, previously
painted swimming pools, and concrete decks.
Dosage: 5 ounces per gallon of acid/water
solution. Coverage: approx. 100-150 sq. ft. per
gallon. Inquire for acid formula instructions.
68-085 1 quart
NELSONITE PAINT COLORS
White
Bahama Blue
Vanishing Edge Gray
Lake Blue
Black
NOTE: Colors shown may vary from
actual coating color.
156
SLIP RESISTANT COATINGS
SAFE STRIDE — Specially formulated water
based acrylic, slip-resistant coating. Contains
integrated grit which provides a tough antislip surface. Safe Stride insures traction,
even on wet surfaces. Colors: black or gray.
Safety yellow available for additional charge.
Coverage: 100-125 sq. ft. per gallon.
69-005 1 gallon can
69-006 1 gallon can, safety yellow
DECK COATINGS
RAMUC ACRYLIC DECK PAINT TYPE ADC
Water-based acrylic deck coating. Protects
previously painted, unpainted and textured
concrete pool decks and walking surfaces.
Resists effect of weather, water, abrasion,
and pool chemicals. Acrylic Deck Paint is
formulated to upgrade Kool-Deck and coat
concrete surfaces. Skid-Tex Additive provides
a nonskid texture to the Acrylic Deck Paint,
add 1 lb. Skid-Tex per gallon. Coverage: 300
sq. ft. per gallon. Apply with roller, brush, or
spray. Dries to service within 24 hours. 1 gallon
colors: whisper white #471, silver creek #466,
cayman sand #469, or dune shadow #463. 5
gallon color: dune shadow #463 only.
69-025 1 gallon can
69-030 5 gallon pail
69-041 Skid-Tex Additive - 1 lb. can
ACRYLIC DECK PAINT COLORS
69-015
SKID-NO-MORE — Rubberized, skid-resistant
latex coating for metal, wood, fiberglass and
concrete. Coverage: 40-60 sq. ft. per gallon.
Colors: basic neutral gray with coloring agents
for white, black, wave blue, dark green, or
tropical red. Use four coloring agent tubes
per gallon, or color as desired. Cleans up with
water.
69-015 1 gallon can
69-020 Coloring agent
Whisper White
#471
Silver Creek
#466
Dune Shadow Cayman Sand
#463
#469
NOTE: Colors shown may vary from
actual coating color.
69-050
DECK SEALER
DECK-O-SHIELD SEALER — Water-based
sealer for natural stone, concrete, and masonry surfaces. Treated surface will inhibit the
penetration of salts into the surface, reducing
whitening and staining. Surface appearance
after application and complete drying is virtually unchanged. Brush or spray on. Coverage:
100 - 175 sq. ft. gallon. Allow 12-14 hours to dry.
VOC Compliant.
69-190 1 gallon
69-195 5 gallon
WATER RESISTANT COATINGS
AQUATAPOXY COATING — Two component
epoxy coating. Apply on damp or dry surfaces.
Dries hard, durable and water resistant. Brush
or roll on. Bonds to plaster, concrete, fiberglass,
tile, metal and wood surfaces. May add sand to
coating mix for slippery areas. Coverage: 160 sq.
ft. per gallon at 10 mil thickness. Kits net 1 quart
or 2 gallons. Thinner: acetone, MEK or xylene
thinner. Color: white. Other available colors: tan,
pool blue, black, gray, or green.
69-045 1 quart kit
69-050 2 gallon kit
www.lincolnaquatics.com