1
Synchronous carburettor test device with 4 synchronous
clocks
• For synchronous measurement on 2 – 4 carburettors with
vacuum connection to the carburettor
• After adjustment and inspection of the valve clearances the
carburettors should be synchronised
• Universal usage
• Unit for vacuum measurement: 0-70 cmHg / in0-30 inHg
• Generally necessary after a major inspection
• Optimum results for mechanical function-free engines
• Must be used with running engine
• Pressure gauges are fitted on the plate
• In durable plastic storage case
Application range: Multi-cylinder engines require synchronous opening of the throttle valve Through tolerances in the
intake system, adjustment of the throttle valve stop is not sufficient. Dynamic adjustment is required her. Through synchronisation, the same vacuum is reached before the carburettors.
A dial is required for each carburettor for synchronisation.
Adjustment of the individual compressors is done via the
adjustment mechanisms.
2
150.1921
Manometer with tube, 10 bar
150.1922
90° Adaptor angled
150.1920-1 Screw adaptor no 1, R1/8”
594
44
3
23
150.1920-10 Screw adaptor no 10, M18 x 1.5
34
150.1920-2 Screw adaptor no 2, 1/8” x 27 NPT
24
150.1920-3 Screw adaptor no 3, 1/4” x 18 NPT
33
150.1920-4 Screw adaptor no 4, 3/8” x 20 UNF
23
150.1920-5 Screw adaptor no 5, 1/2” x 20 UNF
4
27
150.1920-6 Screw adaptor no 6, M10 x 1.0
24
150.1920-7 Screw adaptor no 7, M12 x 1.5
24
150.1920-8 Screw adaptor no 8, M14 x 1.5
29
150.1920-9 Screw adaptor no 9, M16 x 1.5
33
5
6
Cylinder leak detector tester set
CO2 Cylinder head leak testing set
• For the locating of leaks on combustion engines
• Rational and dependable finding of cracks and leakages
• Potential CO2 content in the coolant solution is detected
• Ideally suited for the cylinder head, cylinder head seals and
engine block
• Leakages are visible through discoloration of the test fluid
• For all current vehicles with water cooled engines (Gas,
Diesel and Petrol)
• Automatic regenerating reaction fluid for multiple use
• In durable plastic storage case
• For diagnosis of compression pressure loss
• Suitable for analysing inlet and outlet valves, piston rings or
cylinder liner, cylinder head or head seal
• Better alternative for compression measurement
• Universal usage
• Integrated pressure reducer
• Necessary workin