ECS Lift
add-on for lifting heavy loads up to 2.2 Kg
ECS Lift 3030/5050
For lifting high loads exceeding the capabilities of the
ECSz5050 attocube offers the ECS Lift upgrade kit. It
consists of front and backplate for an existing ECSx
positioner and three different constant force springs
compensating the specified load.
There are two versions available for ECSx3030 and
ECSx5050 with a different set of springs each. You
can easily change between any of the three springs
delivered with the ECS Lift kit. ECS Lift units can be used
in all working conditions as specified for the used ECS
positioners. The load compensated is independent of the
vacuum conditions. The resulting force can be tuned to
your application by adding balance weights.
ECS Lift/3030 ECS Lift/5050
46.5 x 63 mm² 68.5 x 92 mm²
height 74 mm 94.75 mm
weight (mechanical parts) 94.8 g
footprint base plate
weight (spring add-on)
279.5 g
13 - 60 g
weight (parts to be lifted) 56.3 g
dynamic force specified by used ECS positioner model
constant force (independent
from environment conditions)
153.3 g
option 1: 5 N (± 20%)
option 2: 8.8 N (± 20%)
option 3: 14.7 N (± 20%)
option 1: 10.5 N (± 20%)
option 2: 17.9 N (± 20%)
option 3: 22 N (± 20%)
Technical Specifications
material
stainless steel, PEEK
temperature range 0 .. 150 °C
minimum pressure 5E-11 mbar; ECS Lift units can be used in all working
conditions as specified for the used ECS positioners
scope of delivery
mechanical support unit,
spring add-on packages for all listed constant force options
attoMOTION
Piezo-based Nano Drives