Accessories
optional items for the attoMICROSCOPY product line
Inspection optics
Performing cryogenic measurements implies that the sample cannot be accessed
during the measurement, and also, that usually there is no clear line of sight to the
sample inside the cryostat. This sometimes adds to the difficulty in low temperature
SPM. With our inspection optics, you can see your AFM tip and the sample even when
cold, and e.g. check roughly where you are on your sample, and what is currently
going on.
5µm
The inspection optics upgrade contains
• In-situ-LED illumination
• In-situ mirror and optics
• room temperature CCD with imaging software
• magnification: 1x
Compatible microscopes: AFM I, AFM III, SHPM, AFM/STM
Article Art. No.
inspection optics upgrade 1004298
Closed loop upgrade for positioners (/RES)
Finding and retrieving regions of interest greatly benefits from having /RES encoders
on the coarse positioners, since this allows to address any position within the 5
mm x 5 mm x 5 mm total range of positioners with 200 nm resolution & 1-2 µm
unidirectional repeatability.
This upgrade contains
• replacement of ANPxyz open loop positioners with ANPxyz/RES closed loop positioners
• replacement of ANC300 open loop electronics with ANC350 closed loop electronics
• wiring upgrade for 3xRES incl. breakout panels
Compatible microscopes: AFM I, AFM III, SHPM, AFM/STM, CFM I, CFM II, RAMAN
Article Art. No.
/RES upgrade 1009828
attoMICROSCOPY
Sophisticated Tools for Science
PAGE 171