American Motorcycle Dealer AMD 230 September 2018 - Page 52

ACCEL S/S Wire Sets Twin Power Adds 34T Comp Eliminator for M-8 Touring Models Holley/MSD has announced the release of ACCEL Motorcycle S/S spark plug wire sets for Softail Rocker, Rocker C, Breakout, and Blackline motorcycles. Available in four colors - black, red, blue, and classic ACCEL yellow - they feature extra-thick 8 mm silicone jackets and silicon insulation to eliminate the electrical leakage and RFI interference that can weaken ordinary ignition systems. Described as a perfect fit for ACCEL SuperCoils, they “provide maximum spark energy from the coil to the plugs, fit securely every time, and come in custom-fit sets ready to install with no cutting or splicing required.” ACCEL PERFORMANCE Cleveland, Ohio, USA Tel: 216 688 8300 www.accel-motorcycle.com Stainless 2-into-1 ‘Upsweep’ for M-8 Softail Vance & Hines says that its new 2-into-1 ‘Upsweep’ exhausts for M-8 Softails are “refined from four decades of on-track competition - they look and act the part.” Hand TIG-welded in high grade (ASTM A269) 304 stainless steel with a brushed “works” finish, the company says they are “engineered to maximize torque and power out of the Milwaukee-Eight powerplant,” and feature an oversized 2-into-1 merge collector, megaphone muffler and race inspired heat shield. They fit forward and mid control models (an adapter for mid control models - Street Bob and Low Rider - is included), excepting for the 2018 Fat Boy, Breakout, Heritage Classic and Sport Glide. Twin Power has announced the addition of a new 34-Tooth Compensator Eliminator Sprocket for M-8 Touring Models to its fast-growing product line. Founded in 1982, Twin Power has been designing and producing (and fully testing) quality parts and accessories for American V-twins ever since. The Compensator Eliminator Sprocket reduces noise and improves the starting and starter life of the motorcycle. Also, throttle response, acceleration, and shifting are greatly enhanced due to a 4.8 lb. reduction in rotating weight. Made in the USA, it is fully machined from 4140 tool steel, precision heat treated and stressed relieved. Installation is easy and includes necessary hardware and instructions. No other modifications to the machine are required. “We introduced our Compensator Eliminator for Twin Cams in 2016,” says James Simonelli, Twin Power Brand Manager. “It only made sense to apply what we learned to a new part for the M-8 Touring models and they have shown incredible performance potential so far.” Twin Power products are distributed exclusively by Tucker V-twin. To inquire about becoming a Tucker dealer, contact the New Dealer Development Department at 817-258-9255 or newdealer@tucker.com. TUCKER V-TWIN Fort Worth, Texas, USA Tel: 817 258 9000 www.tucker.com/v-twin Memphis Fats for 2018 Fat Boy Rossville, Tennessee based Memphis Shades’ new ‘Memphis Fat’ windshield design for the 2018 Fat Boy features a headlight opening designed specifically for the popular new version of one of Harley’s bestselling Softails. Available in five heights - 13”, 15”, 17”, 19” and 21” - the windshield straps are polished stainless steel or Night Shades (E-coated black) and two gradient colors - clear, solar, black, nightshades black and dark black smoke (a black tint with 10% visible light transmission). Mount kits must be purchased separately and seen here is Memphis VANCE & HINES Santa Fe Springs, California, USA Tel: 562 921 7461 sales@vanceandhines.com www.vanceandhines.com Shades’ Revolutionary ‘No-Tool’ Trigger-Lock system, designed for use with the company’s popular Fats and Slim windshields. The innovative design allows you to quickly and easily remove windshields without the use of any tools. A pair of latches lock the windshield down until the spring loaded “trigger locks” are intentionally disengaged, allowing the rider to remove the windshield. The hardware is fully adjustable to achieve just the right windshield angle. The model- specific, custom-fit, easy install kits are available polished or black, E- coated in a combination of CNC-machined aluminum plates, stainless steel bolts and aluminum anchors, or black E-coated plates, bolts and anchors. DRAG SPECIALTIES Janesville, Wisconsin, USA Tel: 608 758 1111 drag@dragspecialties.com www.dragspecialties.com 52 AMERICAN MOTORCYCLE DEALER - SEPTEMBER 2018 www.AMDchampionship.com