American Motorcycle Dealer AMD 228 July 2018 | Page 52
Hawg Halters Bolt-On Neck Cover
Kits, Speed King Handlebars
Georgia based Hawg
Halters, Inc. (HHI) is
now offering these
custom designed
Neck Rake Cover Kits
“to finish off your
Hawg Halters Bolt-On
Neck Rake Kit
installation.”
Designed specifically to fit and
work with HHI X-26 and X-30 packages,
these kits (seen here for the Road Glide) are
described as a “classic finish to the neck
rake upgrade.” Made from advanced grade
polymer with a proper inspection port for
the Vehicle Identification
Number, they are an easy
snap on and paintable
installation with all
necessary hardware
included.
Hawg Halter’s newest
development bike for new
product R&D is the 2018
Softail Slim and seen here
in gloss black are the
company’s 9-inch Speed
King handlebars.
Available in black or
chrome, HHI Speed King
handlebars can be ordered
as a bare bar, or as a
complete plug and play bolt-
on assembly - complete with
custom HHI hand controls.
HAWG HALTERS INC.
Dahlonega, Georgia, USA
Tel: 877 442 5837
[email protected]
www.hawghalters.com
Baker Klassic Kicker Gears
Baker Drivetrain started to manufacture its own
design 6-into-4 transmissions with kickers over five
years ago. “At the time, we could only purchase some
Taiwanese kicker gears in volume,” says Bert ‘Gear
Head’ Baker, “because nobody made them in the
USA anymore.
“So, we stepped up. We now tooled up and now
make our own, right here at our own facility in
Michigan; they come as standard on all our 4-speeds,
6-into-4's, and kicker kits.
“You can spot the difference easily. Take a pair of
imported gears and roll the teeth together - they roll
like a mismatched pair of gears and are dangerous
to have inside your tranny. Our Klassic Kicker Gears
roll smooth as glass - they’re not cheap, but they are
way more reliable and last a lot, lot longer without
the potential for gear failure damage that is inherent
with inferior product.”
They are available for ‘36-‘86 H-D Big Twin kicker
equipped models, will work with the 14-tooth H-D
starter gear and with our 4-speed and 6N4 kicker
equipped transmissions.
The kit includes a 16-tooth starter gear, 24-tooth
starter crank (and lock washer), clutch and clutch key
and side cover gasket.
BAKER DRIVETRAIN
Haslett, Michigan, USA
Tel: 517 339 3835
[email protected]
www.bakerdrivetrain.com
52
AMERICAN MOTORCYCLE DEALER - JULY 2018
www.AMDchampionship.com