American Motorcycle Dealer AMD 222 January 2018 - Page 32

Bridge style riser kits and more from Joker Machine This 1” bar, lightweight Bridge style handlebar riser kit by Lake Havasu City, Arizona based Joker Machine is a fully CNCmachined racing styled design made from solid 6061-T6 bar stock for maximum strength. The riser bases are threaded 1/2”-13 for Harley upper tree applications; the top clamp measures 1.1” x 2.4” and is available in hard black anodized and chrome finish. Also seen here, Joker Machine full length style ‘King’ dash covers are a billet aluminum, one-piece finned design that fits over the existing stock dash. The single Rat Eye style turn signals have CNC billet aluminum machined housings with DOT-approved 18 mm amber or red LEDs. Said to feature an exceptional beam angle, the single-function design can be converted to run/turn or run/turn/brake; side-mounted, wires exit from the back of the signal housing. The compact design measures 1.5” L x 0.875” square and stand off the bike by 1.20” when mounted (they use any 5/16”/8 mm hole); mounting hardware included and sold in pairs. These fork tube clamps can be used to mount Joker Machine Rat Eye, Astro and Vega turn signals to fork tubes. CNCmachined from 6061 billet aluminum, they are available with a chrome or black Road racing footpegs Fork tube clamps Full length style 'King' dash covers Bridge handlebar riser kits Single rat eye turn signals anodized finish, sold in pairs and include mounting hardware. Joker Machine road racing style footpegs feature an intricately CNC-machined tread pattern in the top surface for optimal grip and replace the stock rubber or cast iron units. Much lighter than stock, they have an angled design for better road clearance when cornering and full 360-degree footpeg rotation. Machined from solid blocks of 6061-T6 billet aluminum, these male-mount footpegs have Joker’s exclusive pitch adjustment screw to maintain the proper upward angle of the peg. Measuring 3 1/4” L x 1 1/4” W, they are available in raw or hard black anodized finish, lighter than stock and have an angled design for better road clearance when cornering; available in raw or hard black anodized finish. All available through Drag Specialties. DRAG SPECIALTIES Janesville, Wisconsin, USA Tel: 608 758 1111 drag@dragspecialties.com www.dragspecialties.com 32 AMERICAN MOTORCYCLE DEALER - JANUARY 2018 www.AMDchampionship.com Bridge style riser kits and more from Joker Machine This 1” bar, lightweight Bridge style handlebar riser kit by Lake Havasu City, Arizona based Joker Machine is a fully CNC- machined racing styled design made from solid 6061-T6 bar stock for maximum strength. The riser bases are threaded 1/2”-13 for Harley upper tree applications; the top clamp measures 1.1” x 2.4” and is available in hard black anodized and chrome finish. Also seen here, Joker Machine full length style ‘King’ dash covers are a billet aluminum, one-piece finned design that fits over the existing stock dash. The single Rat Eye style turn signals have CNC billet aluminum machined housings with DOT-approved 18 mm amber or red LEDs. Said to feature an exceptional bea )ѡͥչѥͥ)ٕѕѼոɸȁոɸɅ)ͥչѕݥɕ́Ёɽѡ)ѡͥͥ)QЁͥɕ̀ĸ׊t0(׊tՅɔхѡ(ĸÊtݡչѕѡ͔Լۊt)쁵չѥɑ݅ɔՑ)ͽ̸)Q͔ɬՉ͕́Ѽ)չЁ)ȁ5IЁ唰ɼ)Yɸͥ́ѼɬՉ̸ 9 )ɽāЁյմѡ)ɔمݥѠɽȁ) ɥȁɥ͕ȁ)MɅЁ唁ɸͥ)镐͠ͽ́Ց)չѥɑ݅ɔ))ȁ5ɽɅ屔)ɔɥѕ 9 ɕ)ѕɸѡѽəȁѥɥ)ɕѡѽՉȁȁЁɽ)չ̸)5Սѕȁѡѽѡ䁡ٔ)ͥȁѕȁɽɅ)ݡɹɥձɕ)ɽхѥ5ɽͽ́(ĵP؁Ёյմѡ͔չ)́ٔ)ˊé፱ͥٔэ()ɬՉ)IɅ))ձѠ屔(-ٕ͠)ѵЁ͍ɕ܁Ѽхѡɽ)݅ɐѡ)5ɥ̀ļӊt0Āļӊt\ѡ䁅ɔ)مɅ܁ȁɐ镐)͠ѕȁѡѽٔ)ͥȁѕȁɽɅ)ݡɹɥ쁅مɅ܁ȁɐ)镐͠مѡɽ՝)ɅMѥ̸)IMA %1Q%L))٥]͍ͥUM)Q)ɅɅѥ̹)ܹɅѥ̹)5I% 85=Q=I e 11H)9UId)ܹ5͡