GASKETED PLATE HEAT EXCHANGERS 10TE
Protection for the set of plates (Option from
DN 100)
304 stainless steel panel
Ceramic
fibre
insulation
M6 bolts
Gasketed plate
heat exchanger
Condensate drain pan (Option for all sizes)
Depending on the size of the exchanger
■■ Precautions
Connect the ¾’’ sleeve to a suitable discharge system.
CONTROLS
■■ Advantages
• Recovery and drainage of all traces of condensation
which could form on the external surface of the
exchanger.
• Recovery and drainage of any fluids which could
accidentally escape from the exchanger: ensuring the
safety of personnel and of the environment.
■■ Technical specifications
• Stainless steel panels (AISI 304).
• ¾’’ sleeve (internal tapping) for drainage of the
collected fluids.
■■ Diagram
AIR TREATMENT
■■ Description
The recovery pan is designed to drain not just the water forming
condensation on the exchanger, but also any fluid which could
come from an accidental leak around the exchanger.
Its use is recommended in all applications which carry a risk
of condensation and those which carry a risk of environmental
pollution.
The pan is made from stainless steel and is designed to be
installed underneath the exchanger.
It is positioned and secured to the exchanger using a system
of screws, nuts and washers.
COOLING
■■ Advantages
• Personnel carrying out maintenance work or
manoeuvring close to the exchanger are protected.
• Heat protection: risk of contact burns is prevented.
• Mechanical protection: risk of burns due to splashes of
hot fluid is prevented.
■■ Technical specifications
• Stainless steel panels (AISI 304).
• Ceramic fibre insulation, 13 mm thick.
■■ Diagram
HEATING HEATING
■■ Description
The protection system for the set of plates is designed to
enclose the entire set of plates.
It is recommended to be used as protection when the
temperature of the fluids circulating in the exchanger reaches
or exceeds 80°C.
The protection is designed in two sections secured together
by bolts, and can be adapted to the dimensions of the
exchanger. Each section is formed of a stainless steel panel
and a 13 mm-thick section of ceramic fibre insulation.
C
A
R
R
I
E
R
2
0
1
6
/
2
0
1
7
355