AHI Carrier Catalog | Page 302

Sound levels COOLING SOUND PRESSURE LEVEL (Lp) * /SOUND POWER LEVEL (Lw)** - dB(A) AC MOTORS (A9) EC MOTOR (E9) Impeller Ø 910mm Impeller Ø 910mm Speed 1270 980 900 690 Wiring Δ Y Δ Y 1000 Lp Lw Lp Lw Lp Lw Lp Lw Lp Lw 1060 70,2 102,4 61,7 93,9 62,7 94,9 55,8 88 64,1 96,3 1080 71,3 103,6 62,8 95,1 63,8 96,1 56,9 89,2 65,2 97,5 1100 72,1 104,6 63,6 96,1 64,6 97,1 57,7 90,2 66 98,5 1120 72,8 105,4 64,3 96,9 65,3 97,9 58,4 91 66,7 99,3 1140 73,3 106,1 64,8 97,6 65,8 98,6 58,9 91,7 67,2 100 1160 73,8 106,6 65,3 98,1 66,3 99,1 59,4 92,2 67,7 100,5 1180 74,1 107,2 65,6 98,7 66,6 99,7 59,7 92,8 68 101,1 1200 74,5 107,6 66 99,1 67 100,1 60,1 93,2 68,4 101,5 SOUND PRESSURE LEVEL (Lp) * /SOUND POWER LEVEL (Lw)** - dB(A) AC MOTORS (A8) EC MOTOR (E8) Impeller Ø 800mm Impeller Ø 800mm Speed 900 700 690 560 425 300 Wiring Δ Y Δ Y Δ Y 510 740 Lp Lw Lp Lw Lp Lw Lp Lw Lp Lw Lp Lw Lp Lw Lp Lw 1060 57 89,2 49,8 82 46,5 78,7 41,4 73,6 35,8 68 27,1 59,3 41,5 73,7 50,1 82,3 1080 58,1 90,4 50,9 83,2 47,6 79,9 42,5 74,8 36,9 69,2 28,2 60,5 42,6 74,9 51,2 83,5 1100 58,9 91,4 51,7 84,2 48,4 80,9 43,3 75,8 37,7 70,2 29 61,5 43,4 75,9 52 84,5 1120 59,6 92,2 52,4 85 49,1 81,7 44 76,6 38,4 71 29,7 62,3 44,1 76,7 52,7 85,3 1140 60,1 92,9 52,9 85,7 49,6 82,4 44,5 77,3 38,9 71,7 30,2 63 44,6 77,4 53,2 86 1160 60,6 93,4 53,4 86,2 50,1 82,9 45 77,8 39,4 72,2 30,7 63,5 45,1 77,9 53,7 86,5 1180 60,9 94 53,7 86,8 50,4 83,5 45,3 78,4 39,7 72,8 31 64,1 45,4 78,5 54 87,1 1200 61,3 94,4 54,1 87,2 50,8 83,9 45,7 78,8 40,1 73,2 31,4 64,5 45,8 78,9 54,4 87,5 * Values measured at 10 m for horizontal units in free field, directivity 2, in line with the coil. Tolerance ±3dB. ** Only the sound power level is characteristic of the unit. These values are obtained in compliance with the ISO 3744 standard. The difference between the sound power level and pressure level varies according to the site. To determine the unit’s sound pressure level, recalculate it using the sound power level of the unit and the site conditions (you may need to consult an acoustical engineer). As the sound emitted by the unit is not uniform in all directions, for a point 10 m away in line with the fans, the recalculated pressure value must be increased by approximately 4 dB. 302 C A R R I E R 2 0 1 6 / 2 0 1 7