WATER-COOLED LIQUID CHILLERS 30XW 254-1762
No.
Description
Advantages
Use 30XW
Medium-temperature brine
solution
5
Implementation of new algorithms of control and
evaporator redesign to allow chilled brine solution
production down to -6°C when ethylene glycol is
used (-3°C with propylene glycol)
Covers specific applications such as ice
storage and industrial processes
Only sizes
512/562/
1012/1154
Low-temperature brine solution
6
Implementation of new algorithms of control and
evaporator redesign to allow chilled brine solution
production down to -12°C when ethylene glycol is
used (-8°C with propylene glycol)
Covers specifi c applications such as ice
storage and industrial processes
Only sizes
512/562/
1012/1154
Light-brine solution, down to
-3°C
8
Implementation of new algorithms of control
to allow chilled brine solution production down
to -3°C when ethylene glycol is used (0°C with
propylene glycol)
Matches with most application requirements for
ground-sourced heat pumps and fits with many
industrial processes requirements
254-1762
Unit supplied in two assembled
parts
51
The unit is equipped with flanges that allow
disassembly of the unit on site
Facilitates installation in plant rooms with limited Only sizes
access
1612/1652/
1702/1762
Master/slave operation
58
Unit equipped with supplementary water outlet
temperature sensor kit to be field-installed allowing
master/slave operation of two units connected in
parallel
Optimised operation of two chillers connected
in parallel with operating time equalisation
254-1762
Single power connection point
81
Unit power connection via one main supply
connection
Quick and easy installation
1002-1762
No disconnect switch, but
short circuit protection
82A
Unit without disconnect switch, but with shortcircuit protection device
Permits an external electrical disconnect
system for the unit (field-supplied), while
ensuring unit short circuit protection
254-1762
Evaporator pump electrical
power / control circuit
84
Unit equipped with an electrical power and control
circuit for one pump evaporator side
Quick and easy installation: the control of fixed
speed pumps is embedded in the unit control
252-1252,
1314
Evaporator dual pumps
electrical power / control circuit
84D
Unit equipped with an electrical power and control
circuit for two pumps evaporator side
Quick and easy installation: the control of fixed
speed pumps is embedded in the unit control
252-1252,
1314
Condenser pump electrical
power / control circuit
84R
Unit equipped with an electrical power and control
circuit for one pump condenser side
Quick and easy installation: the control of fixed
speed pumps is embedded in the unit control
252-1252,
1314
Condenser insulation
86
Thermal condenser insulation
Minimizes thermal dispersions condenser side
(key option for heat pump or heat recovery
applications) and allows compliancy with
special installation criteria (hot parts insulated)
254-1762
Service valve set
92
Liquid line valve (evaporator inlet) and compressor
suction line valve
Allow isolation of various refrigerant circuit
components for simplified service and
maintenance
254-1762
Evaporator with one pass
100C Evaporator with one pass on the water side.
Evaporator inlet and outlet on opposite sides.
Easy to install, depending on site. Reduced
pressure drops
254-1762
Condenser with one pass
102C Condenser with one pass on the water side.
Condenser inlet and outlet on opposite sides.
Easy to install, depending on site. Reduced
pressure drops
254-1762
21 bar evaporator
104
Reinforced evaporator for extension of the
maximum water-side service pressure to 21 bar
(standard 10 bar)
Covers applications with a high water column
evaporator side (typically high buildings)
254-1762
21 bar condenser
104A
Reinforced condenser for extension of the
maximum water-side service pressure to 21 bar
(standard 10 bar)
Covers applications with a high water column
condenser side (typically high buildings)
254-1762
Reversed evaporator water
connections
107
Evaporator with reversed water inlet/outlet
Easy installation on sites with specific
requirements
254-1762
Reversed condenser water
connections
107A
Condenser with reversed water inlet/outlet
Easy installation on sites with specific
requirements
254-1762
JBus gateway
148B
Two-directional communication board complying
with JBus protocol
Connects the unit by communication bus to a
building management system
254-1762
LON gateway
148D
Two-directional communication board complying
with Lon Talk protocol
Connects the unit by communication bus to a
building management system
254-1762
Bacnet over IP gateway
149
Two-directional high-speed communication using
BACnet protocol over Ethernet network (IP)
Easy and high-speed connection by ethernet
line to a building management system. Allows
access to multiple unit parameters
254-1762
High condensing temperature
150
Optimized compressor for operation at high
condensing temperature
Increased condenser leaving water temperature
up to 63°C. Allows applications with high
condensing temperature (heat pumps,
installations with not generously sized drycoolers or more generally, installations with drycoolers in hot climate). NOTE: to ensure control
of the condenser leaving water temperature,
this option must be fitted with 30XWH units.
254-1762
Condensing temperature
limitation
150B
Limitation of the maximum condenser leaving water Reduced maximum power input and current
temperature to 45°C
absorption: power cables and protection
elements can therefore be downsized
C
A
R
R
I
E
R
2
0
1
6
/
2
0
1
7
CONTROLS
AIR TREATMENT
HEATING HEATING
Options
COOLING
Options
254-1762
253