AIR-COOLED LIQUID CHILLERS 30XAV 500-1150
No.
Description
Advantages
Use 30XAV
230V electrical plug
284
230V AC power supply source
provided with plug socket and
transformer (180 VA, 0,8 Amps)
Permits connection of a laptop
or an electrical device during unit
commissioning or servicing
500-1150
Expansion tank
293
6 bar expansion tank in the hydraulic
module (require option 116)
Protects closed hydronic circuit from
excessive pressure
Sizes 500/600
only
Fast Capacity Recovery
QM295
New software algorithms to allow
quick restart and fast loading while
preserving unit-reliability
Full capacity recovery in less than 5
minutes after power failure. Matches
requirements of typical critical missions
applications
500-1150
Carrier Connect link (BSS
regions only)
298
3G router board
NOTE 1: require option 149
NOTE 2: when more than one machine
is installed on site, only one of them
shall be equipped with option 298
while all of them must be equipped
with option 149
NOTE 3: if a CARRIER-PSM is on site,
option 298 shall be integrated in the
PSM while option 149 is still mandatory
for each single unit.
Enabler for Carrier Connect service
offer
500-1150
Variable Water Flow control
299
Hydronic control function package
that permits control of the water flow
rate based on different possible logics
(at customer choice): constant ∆T,
constant outlet pressure and "fixedspeed" control.
When variable-speed pumps on
the primary circuit, the VWF control
modulates flow rate through the
evaporator, minimising pump
consumption while ensuring safe/
optimised chiller operation
500-1150
■■ The 30XAV is designed for high performance both at full
and part load: ESEER up to 4,9 and EER up to 3,4.
■■ The high energy efficiency is reached through:
-- Inverter-driven twin-rotor screw com pressors allowing
precise capacity control and reducing unit power
input, especially at part-load
-- Inverter-driven fan motors minimising power
consumption while granting optimum air flow
-- All aluminum condenser with high-efficiency microchannel coils technology
-- Flooded shell-and-tube evaporator characterised by
high efficiency of heat exchange
-- Electronic expansion device permitting operation at a
lower condensing pressure and improved utilisation
of the evaporator heat exchange surface (superheat
control)
-- Economiser system with electronic expansion device
for increased cooling capacity.
■■ Optimised electrical performance:
-- Negligible start-up current (value is lower than the
maximum unit current draw)
-- High displacement power factor (above 0.98)
-- EMC compliancy with Class 3 requirements of the EU
standard EN61800-3 (Class 2 is possible as an option).
C
A
R
R
I
E
R
2
0
1
6
/
2
0
1
7
Built-in reliability and
easy servicing
The 30XAV units offer increased global performance as well
as Carrier’s acclaimed product quality and reliability. Major
components are selected and tested to minimise failures
possibility, as well as many design choices have been taken
in this perspective.
■■ Screw compressors with Greenspeed® Intelligence:
-- The screw compressors are industrial-type with
oversized bearings and motor cooled by suction gas,
with a proven failure rate lower than 0.1%.
-- The inverter is specifically sized for each compressor
motor to ensure reliable operation and easy
maintenance.
-- All components related to the compressor assembly
are easily accessible on site minimising down-time.
■■ Fans with Greenspeed® Intelligence:
-- 4th generation of Flying Bird fans equipped with
inverter-driven asynchronous motors
-- The inverter is sized to manage a group of fan motors
reducing first cost while ensuring optimum air flow
management.
-- The inverters for fan speed control are easily
accessible on site for easy servicing.
CONTROLS
Low energy consumption
AIR TREATMENT
Features and advantages
HEATING HEATING
COOLING
Options
201