AGC San Diego Education & Safety Training Catalog - Jan. to June 2018 AGC San Diego Education Catalog January to June 20 | Page 35
Safety Training
QUALIFIED RIGGING AND SIGNAL PERSON CERTIFICATION
Attend this training to meet the new Federal OSHA standards for rigging and signaling. Correct rigging is essential to make the
lift safe. Understanding how to calculate load weights, sling angles, and knowing about wire rope are all critical for the rigger. If
you do not know the proper rigging techniques, your load could be improperly attached, and the rigging could fail. Learn the
rejection criteria for wire rope and synthetic slings as well as inspection requirements, how to rig a stable load, and how to select
the proper slings and hardware. This course meets OSHA 29 CFR 1926-1400 compliance standards for Qualified Signal Person,
identified under §1926.1428.
DATE
JANUARY 22, 2018
APRIL 5, 2018
JUNE 12, 2018
TIME
7:00 AM - 4:00 PM
7:00 AM - 4:00 PM
7:00 AM - 4:00 PM
MEMBER
$225
$225
$225
JUP
$0
$0
$0
NON MEMBER
$325
$325
$325
INSTRUCTOR
PEDRO REYES
PEDRO REYES
PEDRO REYES
RESPIRATORY PROTECTION TRAINING
An estimated 5 million workers are required to wear respirators in 1.3 million workplaces throughout the United States. Respirators
protect workers against insufficient oxygen environments, harmful dusts, fogs, smokes, mists, gases, vapors, and sprays. These
hazards may cause cancer, lung impairment, diseases, or death. Compliance with the OSHA Respiratory Protection Standard
could avert hundreds of deaths and thousands of illnesses annually. Why the respirator is necessary and how improper fit, sage,
or maintenance can compromise the protective effect of the respirator; What the limitations and capabilities of the respirator
are; How to use the respirator effectively in emergency situations, including situations in which the respirator malfunctions; How to
inspect, put on and remove, use, and check the seals of the respirator; What the procedures are for maintenance and storage
of the respirator; How to recognize medical signs and symptoms that may limit or prevent the effective use of respirators; and The
general requirements of the standard
DATE
MARCH 20, 2018
MAY 15, 2018
TIME
7:00 AM - 11:00 AM
7:00 AM - 11:00 AM
MEMBER
$100
$100
JUP
$0
$0
NON MEMBER
$150
$150
INSTRUCTOR
LESLIE EASTMAN
LESLIE EASTMAN
SCAFFOLD REGULATION TRAINING “USER SAFETY TRAINING”
This course is designed for personnel who need to be trained as a Competent Person in scaffolding. It includes a standards review
and an exam. This course covers frame scaffold assemblies, freestanding, tied to a structure, and rolling. This class is designed for
those who build scaffolds and inspect them. At course completion, participants will know how to inspect a scaffold for proper
erection. This class also includes training on hazard awareness, which covers safety and regulations of scaffolding and jobsites.
DATE
APRIL 25, 2018
TIME
7:00 AM - 3:00 PM
MEMBER
$250
JUP
$0
NON MEMBER
$350
INSTRUCTOR
SAFWAY SERVICES
SILICA STANDARD FOR CONSTRUCTION COMPETENT PERSON TRAINING
This new half-day course will provide initial training for persons designated by their construction management to act as the Silica
Competent Person for their site(s) or who want to learn more about the role of the competent person under the new OSHA
Construction Regulation (29 CFR 1926.1153) and CalOSHA Construction Regulation (8 CCR 1532.3) for Respirable Crystalline Silica.
Participants will acquire knowledge through lecture and real-world interactive examples that will help prepare them to comply
with the new silica standard. Who needs to be trained all field Employees Foremen, superintendents, and Project managers and
those involved in the proposal and planning phases of construction that may involve silica-containing materials.
DATE
JANUARY 16, 2018
FEBRUARY 1, 2018
MARCH 6, 2018
TIME
7:00 AM - 11:00 AM
7:00 AM - 11:00 AM
7:00 AM - 11:00 AM
MEMBER
$100
$100
$100
JUP
$0
$0
$0
NON MEMBER
$150
$150
$150
INSTRUCTOR
MELISSA BEWLEY
MELISSA BEWLEY
MELISSA BEWLEY
Classes held at the AGC San Diego Chapter Training Center
6212 Ferris Square, San Diego, CA 92121
35