2019 MSCN Catalogue Professional Motorsports Gear | Page 153
section
15
Filters & Breather Tanks
Wix Racing Filters & Oil Accessories
The WIX line of racing oil fi lters features a heavy duty can and cover which
provides up to 500 psi burst pressure protection for high performance racing
engines. You won't collapse this fi lter as it features a Steel Fully Perforated Spiral
Centre Tube that has the highest collapse strength in the industry. Filter fl ow
rates from 28 to 30 GPM provides plenty of fl ow for wide bearing clearances
found in racing engines. Recommended and used by B.K Engines.
Racing performance parts are sold “as is” without any warranty. NO IMPLIED
WARRANTY for fi tness or merchantability is included. The buyer assumes all
risks related to the use of this product. New vehicle and equipment warranties
are voided when this product is used in competitive racing or on modifi ed high
performance engines.
Other Wix Filters available by special order
WIX RACING OIL FILTERS
FILTER NO. THREAD HEIGHT FILTER OD MEDIA TYPE FLOW RATE GPM BYPASS ANTI-DRAIN
WIX 51060R 13/16” -16 5.17” 3.6” T-71 28 None Yes
WIX 51061R 13/16” -16 5.17” 3.6” T-71 28 None No
WIX 51069R 13/16” -16 4.33” 3.6” T-71 28 None No
WIX 51515R 3/4” -16 5.17” 3.6” T-71 28 8-11 PSI Yes
Advanced Performance Oil Filters use a media (T-10) that is rated
at a Frazier air fl ow of approximately 267 CFM and is wire-backed.
The unique wire-backing provides a very stable base for a media
blend of fi berglass, polyester and cellulose. This media is resistant to
high temperatures and water levels in the oil that can plug standard
media types. Our Advanced Performance media (T-10) is designed to
provide a high posi 30 tive oil fl ow with low restriction.
High Effi ciency Endurance Oil Filters use a media (T-71) rated at
a Fraizer air fl ow of approximately 75 CFM. This media contains a
higher resin content than our Advanced Performance Filters to trap
and hold smaller contaminant's and provide higher effi ciency.
C
B
A
PRESSURE TEES
A great way to take off pressure lines for gauges
or turbo feed lines while still retaining the
original sender. Made from brass these tees are
strong and suit a huge range of vehicles.
PRESSURE SWITCHES PRESSURE TEES
These pressure switches are designed to
activate a light when pressure drops below the
closed pressure range as above. Light remains
off at open pressures. Perfect for adapting an aftermarket gauge to a
standard sender location or for running a turbo feed
line.This has 3 x 1/8”NPT holes for multiple uses
from the same outlet!
PART NO. ACTIVATED PRESSURE
THREAD PART NO.
A
B
C
PART NO. A B C
RGA-31 1/8” NPT 1/8” NPT 1/8” NPT
RGA-32 1/4” NPT 1/4” NPT 1/8” NPT
RGA-33 M10 x 1.0 M10 x 1.0 1/8” NPT
AU3241 Closes 15psi Opens 18psi 1/8” NPT 810-M12-02-BLK M12 x 1.5 M12 x 1.5 3 x 1/8”NPT RGA-34 M12 x 1.5 M12 x 1.5 1/8” NPT
AU3242 Closes 30psi Opens 32psi 1/8” NPT 810-M14-02-BLK M14 x 1.5 M14 x 1.5 3 x 1/8”NPT RGA-35 M14 x 1.5 M14 x 1.5 1/8” NPT
AU3243 Closes 50psi Opens 52psi 1/8” NPT 810-M16-02-BLK M16 x 1.5 M16 x 1.5 3 x 1/8”NPT RGA-36 1/8” BSPT 1/8” BSPT 1/8” NPT
SYSTEMS
Breather Tanks
-6 BREATHER TANK -6 & -8 BREATHER TANK -8 BREATHER TANK
Use as a remote Air/Oil Separator.
-6AN Drain, 1-1/2” breather tube and 6mm
Mounting Spuds.
Size: 80mm dia. 155mm high. Capacity: 400ml Use as a remote Air/Oil Separator.
-6AN Drain, 1-1/2” breather tube and 6mm
Mounting Spuds.
Size: 80mm dia. 155mm high. Capacity: 400ml Use as a remote Air/Oil Separator.
-6AN Drain, 1-1/2” breather tube and 6mm
Mounting Spuds.
Size: 80mm dia. 155mm high. Capacity:
400ml
PART NO. INLET PART NO. INLET
CA020-06-06 -6 Male x 2 CA020-08-06 -8 & -6 Male
MOTORSPORT CONNECTIONS
SYDNEY 02 9838 7272
PART NO. INLET
CA020-08-08 -8 Male x 2
MELBOURNE 03 9553 4200
TOLL FREE 1800 242 910
153