2019 MSCN Catalogue Professional Motorsports Gear - Page 108

section 12 Thermal Protection Heat Protection Floor & Tunnel Shield Floor and Tunnel Shield was designed to withstand direct temperatures up to 1750°F. Because of its unique material, it is capable of insulating against unwanted road noise up to 50%. Constructed utilizing an embossed 10 mil aluminium face bonded to a 1/8” composite fi berglass insulation, Floor and Tunnel Shield is backed with an aggressive adhesive that holds past 450°F. Only 3/16” thickness it requires minimal clearance and can be shaped and trimmed for a custom fi t. Floor and Tunnel Shield provides the optimal way to refl ect heat away from vehicle components and perfect for protecting under hoods, fi rewalls, fuel cells, exterior areas such as transmission tunnel, fl oor pans and other under-vehicle locations. FLOOR & TUNNEL SHIELD PART NO. DESCRIPTION DEI 050501 2ft x 12” Sheet (3.5 sq.ft) DEI 050502 4ft x 21” Sheet (7 sq.ft) DEI 050503 4ft x 42” Sheet (14 sq.ft) • Excellent heat and sound barrier • Self adhesive backing for easy installation • Can be trimmed to fi t any shape 1 # • Withstands 1750°F direct continuous heat • Unique material works in harsh environments BEST SELLER Reflect A Cool Refl ect-A-Cool, constructed of fi berglass material backed with a layer of aluminised refl ective foil to handle direct continuous temperature of 400°F has many uses such as covering fi rewalls, marine engine compartments, RVs, in the tub of a racecar where typical mechanical fasteners cannot be used and has many industrial uses. Refl ect-A-Cool can be trimmed to fi t just about any shape. Just measure, trim, face refl ective side towards source of radiant heat and remove self- REFLECT-A-COOL adhesive backing. It’s that easy. • • • • Withstands 2000°F of radiant heat Self adhesive for easy installation Can be easily trimmed to size Virtually NO clearance needed PART NO. DESCRIPTION DEI 010460 12” x 12” Sheet DEI 010461 24” x 12” Sheet DEI 010462 24” x 24” Sheet DEI 010412 48” x 36” Sheet Heat Shroud Heat Shroud is made from a high temperature rated glass fi ber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges. • • • • • • Convenient hook & loop designed edges Withstands 500°F direct continuous/2000°F radiant heat No need to remove wires and hoses Easily trimmed to length Fireproof 1/2” to 1-1/4” diameters x 3 foot length HEAT SHROUD PART NO. DESCRIPTION DEI010405 1/2” to 1-1/4” ID x 3ft Fire Wrap 3000 Constructed from the same material as Fire Sleeve but with the convenience of a hook & loop edge closure design. Simply wrap Fire Wrap 3000 around wires, cables or hoses without the need of disconnecting. • Withstands direct heat up to 500°F • Protects against oil, dirt, road grime and other contaminants • Pliable enough to shape & fi t tightest bends FIRE WRAP 3000 108 MOTORSPORT CONNECTIONS PART NO. DESCRIPTION DEI010477 5/8” ID x 24” (2ft) DEI010478 1” ID x 24” (2ft) DEI010479 1-1/2” ID x 24” (2ft) WEBSITE www.mscn.com.au EMAIL orders@mscn.com.au